Gas stove malfunctions can be scary and dangerous, but a common problem is an orange flame. In this post, I will break down the steps to identify the cause of the orange flame and explain how to fix Orange flame on gas stove.
What is an Orange Flame on a Gas Stove?
An orange flame on a gas stove is usually caused by incomplete combustion. This means that there is not enough oxygen present for the gas to burn completely, resulting in an orange flame. There are several possible causes of this, including a dirty burner, a clogged vent hole, or an incorrect gas-to-air mixture.
If you see an orange flame on your gas stove, you should take action to fix the problem as soon as possible. If left unchecked, incomplete combustion can be dangerous, leading to the release of harmful gases into your home.
How to fix Orange flame on gas stove? here is some steps
- Make sure that all burner ports are clear and free of any dirt or debris. A blocked port will restrict the flow of gas and air, leading to incomplete combustion.
- Clean any debris from the vent holes located around the perimeter of the burner pan. These vents allow oxygen to enter the burner area and help prevent dangerous pockets of gas from forming.
- Check that the gas supply valve is turned on all the way. A partial opening will restrict the flow of gas and can cause incomplete combustion.
- Adjust the air shutter if your stove has one. This device regulates the amount of air that enters the burner area and is often adjustable depending on the type of fuel being used. Too much or too little air can lead to incomplete combustion and an orange flame.
why gas stove flame is orange?
If you have an orange flame on your gas stove, it is most likely due to one of the following reasons:
The air mixture is incorrect
If the air mixture is too rich (there is not enough oxygen), the flame will be orange. To fix this, you need to adjust the air intake so that there is more oxygen getting to the burner.
The gas pressure is too low
If the gas pressure is too low, the flame will also be orange. To fix this, you need to increase the gas pressure.
The burner orifice is dirty
If the burner orifice is dirty, it can restrict the flow of gas and cause an orange flame. To fix this, you need to clean the orifice with a soft brush or compressed air.
Keep in mind before Fixing the Orange Flame
When it comes to working with gas stoves, always err on the side of caution. Here are some safety considerations to keep in mind when fixing an orange flame:
- Make sure the area around the stove is well-ventilated. This will help prevent any build-up of gas fumes.
- Turn off the gas supply before beginning any repair work.
- Use a flashlight to take a close look at the burner assembly, being careful not to touch any hot surfaces.
- If you need to remove any parts for inspection, make sure you know how to put them back together correctly.
With these safety tips in mind, you should be able to fix an orange flame on a gas stove without any problems.
Troubleshooting Steps to Fix an Orange Flame on a Gas Stove
If you have an orange flame on your gas stove, there are a few troubleshooting steps you can take to try and fix the problem. If none of these steps work, you may need to call a professional for help.
Checking the Regulator and Gas Line
If you have an orange flame on your gas stove, the first thing you should check is the regulator. The regulator is a small component that controls the flow of gas to the burner. If the regulator is not working properly, it can cause the flame to be too low or too high.
Next, check the gas line. The gas line is the pipe that delivers gas to the stove. If there is a leak in the gas line, it can cause the flame to be orange. To check for a leak, turn off the stove and smell around the area where the gas line connects to the stove. If you smell gas, there is a leak and you should call a plumber to fix it.
Repairing the Pilot Assembly
If your gas stove has an orange flame instead of a blue one, it’s likely that the pilot assembly needs to be repaired. Here’s how to do it:
- Turn off the gas at the valve behind the stove.
- Remove the burner grates and drip pans.
- Locate the pilot assembly under the cooktop. It consists of a tube with a small hole in it, and a wire that goes to the igniter button.
- Clean any dirt or debris from around the pilot assembly with a paper towel or toothbrush.
- Use a needle-nose pliers to straighten out the wire if it’s bent.
- Insert a small screwdriver into the hole in the tube and turn it clockwise until you feel resistance. This will open up the valve and allow gas to flow through.
- Press the igniter button and hold it down while you light the pilot with a match or lighter. Keep holding down the button for about 30 seconds after lighting, then release it. If everything is working properly, you should see a blue flame coming from the hole in the tube.
Conclusion
Fixing the orange flame on a gas stove can be a simple, straightforward task with some basic know-how to how to fix orange flame on gas stove. Whether it’s caused by incorrect burner adjustment, a clogged nozzle orifice, or improper ventilation due to an unclean vent hood filter, these tips will help you get your gas stove back into top condition in no time. With just a few tools and the right steps, you can achieve perfect blue flames without having to call in an appliance repair specialist.
